Supor® PES Membrane Disc Filters
High flow rate membrane optimized for biological, pharmaceutical, and sterilizing filtration requirements
- Fast filtration with superior flow rates and high throughputs.
- Low protein binding and extensive drug compatibility for critical applications.
- Saves time and money with fewer filter changes per sample volume.
- 142 and 293 mm discs feature printed tab for instant recognition of pore size and lot number.
- May be sterilized by gamma irradiation, EtO, or autoclaving.
- Suited for biological, pharmaceutical, and sterilizing filtration requirements.
- Available for microbiological analysis in individual sterile packaging.
Filter Media
Hydrophilic polyethersulfonePore Size
0.1, 0.2, 0.45, and 0.8 µmDiameter
13 - 293 mmTypical Thickness
0.1 µm: 132 µm (5.2 mils)0.2 µm: 145 µm (5.7 mils)
0.45 and 0.8 µm: 140 µm (5.5 mils)
Typical Water Flow Rate
mL/min/cm2 at 0.7 bar (70 kPa, 10 psi)0.1 µm: 5
0.2 µm: 26
0.45 µm: 58
0.8 µm: 165
Maximum Operating Temperature - Water
100 °C (212 °F)Extractables - Soxhlet Extraction
< 4%Minimum Bubble Point - Water
0.2 µm: 3.5 bar (350 kPa, 51 psi)0.45 µm: 2.5 bar (250 kPa, 36 psi)
0.8 µm: 1.0 bar (100 kPa, 15 psi)
60% IPA/40% H2O (v:v)
0.1 µm: 2.4 bar (240 kPa, 35 psi)Biological Safety
Passes United States Pharmacopeia (USP) Biological Reactivity Test, In Vivo <88>Sterilization
Provided non-sterile. Can be sterilized by autoclaving at 121 - 123 °C (250 - 253 °F) for 30 min. PN 63025, 5010, and 66234 are sterilized by gamma irradiation.
Supor Membrane is Low in Biomolecule Binding



125I-labeled BSA (1.6 µg) or 32P-labeled DNA (500 ng) was diluted to 5 mL in PBS (BSA) or Tris-EDTA (DNA) and filtered through a 13 mm disc of the indicated membrane. Filtration was carried out using a 10 mL syringe at a flow rate of 1.0 mL/minute. Binding was determined by comparing the amount of radioactivity remaining in the membrane (triplicate) to the activity of the starting material by counting the disc or solution in a scintillation counter. Biodyne® B membrane is designed for biomolecule binding and was used as a positive control.
Membrane Water Flow Rate
Supor polyethersulfone membrane flow rate outperfomrs nylon and PVDF membranes of the same pore size (0.2µm).
- 13 mm Plastic Swinney Filter Holder
- 13, 25, and 47 mm Filter Holders, Stainless Steel
- 142 & 293 mm Stainless Steel Disc Filter Holders
- 25 mm Easy Pressure Syringe Filter Holder
- 25 mm In-line Filter Holder, Delrin* Plastic
- 47 mm In-line Filter Holder, Aluminum
- 47 mm In-line Filter Holder, Polycarbonate
- AcroCap™ Positive Pressure Devices
- AcroPak™ 200 Sterile Capsules with Fluorodyne® II & Supor® Membranes
- AcroPak™ 500, 1000, & 1500 Sterile Capsules with Supor® Membrane
- Acrodisc® Syringe Filters with Supor® Membrane
- Acro® 50 Vent Devices
- Acro® 50 Vent Filter with Emflon® II Membrane
- Pressure Rinser
- Stainless Steel Forceps
- Sterile Acrodisc® Syringe Filters - Ideal for Scale Up
- VacuCap® & VacuCap PF Sterile Vacuum Filtration Devices
- Vacuum/Pressure Pumps
Contact Customer Service at 800-521-1520 for possible lead-time and ship date.
|
Your shopping cart is empty. |
| *US List Price applies only to products delivered within the US. These prices do not reflect duties, taxes or tariffs, which may apply to purchases made outside of the US. See our General Limited Warranty. |
© Copyright 2010 Pall Corporation. All rights reserved.
