The most convenient way to filter multiple samples
- Independent operation. Each funnel location has individual port control valves.
- Lightweight and durable for easy handling.
- Save money. Less costly than stainless steel filter funnel manifolds.
- Large port opening makes sanitizing easy.
- Versatile. Accommodates both 25 and 47 mm filter funnels.
- Choose either aluminum or polyurethane construction. Aluminum available with either 1, 3 or 6 places.
- Designed for use in the vacuum filtration of liquids for analysis of microbiological or particulate contamination. Increase laboratory productivity by processing multiple samples simultaneously.
- Polyurethane manifold is ideal for small work areas. Only 27.9 cm (11.0 in.) wide, it still holds three funnels.
- Aluminum manifold is especially suited for applications where chemical compatibility is critical and easy clean-up is desired. Lightweight aluminum is easier to handle and less expensive than stainless steel, while retaining the strength of an alloy.
Aluminum Manifolds
Materials of Construction
Body: Anodized aluminum
Drain Plugs: Stainless steel 1/4 in. MNPT
Valves: Chrome plated brass
Valve O-rings: Viton*
Adapter: Nylon 6.4 mm (1/4 in.)
Dimensions
3-place
Height: 15.7 cm (6.2 in.)
Width: 40.6 cm (16.0 in.)
Depth: 15.2 cm (6.0 in.)
6-place
Height: 15.7 cm (6.2 in.)
Width: 82.6 cm (32.5 in.)
Depth: 15.2 cm (6.0 in.)
Sterilization
Autoclavable if desired at 121 - 123 °C (250 - 253 °F) at 1.0 bar (100 kPa, 15 psi) for 15 - 20 min.
Polyurethane Manifold
Materials of Construction
Body: High impact polyurethane
Drain Plugs: Nylon 1/4 in. MNPT
Valves: Glass-filled polypropylene
Valve O-rings: Buna-N*
Dimensions
Height: 10.2 cm (4.0 in.)
Width: 27.9 cm (11.0 in.)
Depth: 15.2 cm (6.0 in.)
* Do not autoclave with aluminum foil; use autoclave paper or other permeable wrap such as Tyvek.
Print Product Information
E-Mail
Download PDF